LIFT IRRIGATION PUMP SELECTION
SURFACE PUMP
SUBMERSIBLE PUMP
TUTBINE PUMP
First select the suitable type of pump required by clicking the respecve
Radio buon depending on site condion, discharge and head.
The input at “How much water to be pumped in Cubic Meter/hour in
CMH” has to be filled for required quanty of water to be pumped in
Cubic Meters per Hour only.
Input at “Height to be pumped from river in feet or in Meters”. Has
to be filled by measuring and calculang the total vercal height from the
surface of river to the point of delivery of water, in feet or meters in
respecve input boxes. It will automacally converts from feet to meters
and the same is taken for calculaons.
Input at “Horizontal distance to be pumped in feet or In Metres”.
By Calculang the total horizontal distance in feet or meters from the
pump to the point of delivery of water, and fill in the input box
respecvely as above.
At “Power supply available 11KV or Three Phase 415 V” Select the
available power supply by clicking the respecve Radio buon. The
specificaon of the prime mover (motor) and its accessories also varies as
per the power supply.
Select the required make of the pump set at the dropdown menu from.
“Which Make Pump Required ” (at present only UNEEL and Unna
brand pumps are available), If not selected, it will search by default from
the enre make of pumps for the most suitable and efficient pump set.
Select the “BACK” buon, in case to go back to previous page.
Finally select” ”buon to go to the next address entering page
For the rest of the items like SOLAR PUMPS and INDUSTRIAL PUMPS etc.
menon as “UNDER DEVELOPMENT”
