DOMESTIC SUMP/OPEN WELL PUMP SELECTION
INSTRUCTIONS TO INPUT VALUES TO SELECT SUITABLE PUMP
SURFACE PUMP
SUBMERSIBLE HORIZONTAL MONOSET
SUBMERSIBLE VERTICAL MONOSET
First select the suitable type of pump required by clicking the respecve
Radio buon, depending on site condions, required discharge and
head.
Input at Total Water Required per day in litres” required quanty of
water depending on individual house or community purpose by calculang
for the whole day in litres only within the range from 100 to 10,000 litres
for single phase pumps, and 100 to 1,00,000 litres for 3 phase pumps. Or it
can be calculated by the number of persons mulplied at the rate of 150
litres per person per day. For Ex:- If there are 5 persons in a house, then
calculate. 150 X 5 = 750, so it can be filled in the input box as 750 litres
required for the whole day. In the same manner, calculate for a Hotel or
Community.
Input at Total Height to be Pumped In feet or In Metres” ranging
from 10 feet (3 Meters) to 125 feet (40 Meters) for Single Phase Pumps
and 10 feet (3 Meters) to 480 feet (150 Meters) for 3 Phase Pumps, by
Calculang the total height i n feet or meters from boom of the sump
tank to the top of the overhead tank including fricon losses by
considering pipe size and fings etc, and fill in the input box respecvely.
It will automacally converts from feet to meters and the same is taken for
calculaons.
At “Power supply available Single Phase 230V or Three Phase 415 V”
Select the available power supply by clicking the respecve Radio buon.
For small houses single phase power supply is common and only up to 5
HP pumps are available.
Select the required make of the pump set at the dropdown menu from.
“Which Make Pump Required (at present only UNEEL and Unna
brand pumps are available), If not, it will search by default from the enre
make of pumps for the most suitable and efficient pump set.
Select the “BACK” buon, in case you go back to the previous page.
Aer entering all the inputs correctly, click the Search buon to
open the address input page