DOMESTIC OR COMMUNITY BORE WELL PUMP SELECTION
INSTRUCTIONS TO INPUT VALUES TO SELECT SUITABLE PUMP
100 MM (4”) 150 MM (6”)
First select the suitable size of bore well Drilled by clicking the above
respecve Radio buon.
Enter total depth of the bore well drilled either in feet or in meters in the
respecve input box at “Total Bore Depth in feet or In Meters”. If
entered in feet, it automacally converts and takes only in meters for
calculaon.
Enter the standing water level in the bore well from ground level in feet or
in meters as above at “Stac water level in feet or in meters”.
Enter the depth at which the maximum water (Struck) got while drilling
the bore well from ground level at “Final water source depth in feet or
in meters” as above.
Enter at “Height to be pumped from ground level in feet or In
meters” calculate the total height, the water to be pumped in feet or
meters ranging 10 to 900 feet or 3 to 275 meters for Single phase and 10
to 1500 feet or 3 to 450 meters for three phase pumps as above, from
ground level or from the top of bore well to the point of delivery of water.
Next, enter the total quanty of water (Struck) got from the bore well at
the me of drilling in LPM only (Litres Per Minute) ranging from 5 to 550
LPM for Single Phase and 20 to 1600 LPM for 3 Phase pumps by measuring