AGRICULTURE OPEN-WELL PUMP SELECTION
INSTRUCTIONS TO INPUT VALUES TO SELECT SUITABLE PUMP
SURFACE PUMP
SUBMERSIBLE HORIZONTAL MONOSET
SUBMERSIBLE VERTICAL MONOSET
First select the suitable type of pump required by clicking the respecve
Radio buon depending on site condion, discharge and head.
The input at “Water to be pumped in LPM (litres per minute)” has to
be filled ranging from 10 to 1000 litres per minute for single phase pumps,
and 25 to 4000 litres per minute for 3 phase pumps, by calculang the
total quanty of water available from the well in LPM only. (Litres Per
Minute), also by considering the total requirement of water.
Input at “Depth of the well in feet or In Metres” by Calculang the
total depth in feet or meters from ground level to the boom of the well
and fill in the input box respecvely. It will automacally convert from feet
to meters and the same is taken for calculaons.
At “Power supply available Single Phase 230V or Three Phase 415 V”
Select the available power supply by clicking the respecve Radio
buon, Upto 5 HP pumps available in single phase. For higher discharge
and head select 3 phase supply as above.
Select the required make of the pump set at the dropdown menu from.
“Which Make Pump Required ” (at present only UNEEL and Unna
brand pumps are available), If not selected, it will search by default from
the enre make of pumps for the most suitable and efficient pump set.
Select the “BACK” buon, in case you go back to the previous page.
Aer entering all the inputs correctly, select or click the “ ” buon, next
to open the address input page.