AGRICULTURE CANAL OR RIVER PUMP SELECTION
INSTRUCTIONS TO INPUT VALUES TO SELECT SUITABLE PUMP
SURFACE PUMP
SUBMERSIBLE HORIZONTAL MONOSET
SUBMERSIBLE VERTICAL MONOSET
First select the suitable type of pump required by clicking the respecve
Radio buon depending on site condion, discharge and head.
Input at “Water to be pumped per minute in Litres”. To be filled the
quanty of required water to be pumped at which rate should be entered
in LPM only ranging from 10 to 1000 litres per minute for single phase
pumps, and 25 to 4000 litres per minute for 3 phase pumps.
The input at “Height to be pumped from the boom of the Canel or River
in Feet or in meters” has to be filled by measuring and calculang
the total vercal height from the boom of the canal or river to the point
of delivery of water in feet or meters in respecve input boxes. It will
automacally converts from feet to meters and the same is taken for
calculaons.
Input at “Horizontal distance to be pumped in feet or In Metres”.
By Calculang the total horizontal distance in feet or meters from the
pump to the point of delivery of water, and fill in the input box
respecvely as above.
At “Power supply available Single Phase 230V or Three Phase 415 V”
Select the available power supply by clicking the respecve Radio
buon. For above 5 HP pump sets or higher discharge and head, only 3
phase pumps are available.
Select the required make of the pump set at the dropdown menu from.
“Which Make Pump Required ” (at present only UNEEL and Unna
brand pumps are available), If not selected, it will search by default from
the enre make of pumps for the most suitable and efficient pump set.
Select the “BACK” buon, in case to go back to previous page.
Finally select” ”buon to go to the next address entering page.
